>
HOME INDEXING CALL FOR PAPERSJOURNAL POLICY MANUSCRIPT CURRENT ARCHIVES EDITORIAL TEAM
   
TITLE : SIMULATION OF GEOMETRICAL CROSS-SECTION FOR PRACTICAL PURPOSES  
AUTHORS : Bhasker R.S      Prasad R. K      Kumar V       
DOI : http://dx.doi.org/10.18000/ijodam.70124  
ABSTRACT :

In the present work we have tried to optimize the cross sectional area of curved beam, by properly selecting the parameters with the help of computer. Flexural formula is reasonably held good for this calculation [1], This study forces on both bending stresses either tensile or compressive along with displacement centroidal axis with respect to neutral axis called eccentricity. Software's developed in the present work have been run successfully; trapezoidal section is the most suitable for curved beam among circular, rectangular, triangular trapezoidal T and I - sections. Trapezoidal section takes maximum total stresses with minimum shift in eccentricity.

Keywords: Curved beam, flexural equation, eccentricity, bending stresses, trapezoidal cross-section 
 
  Download Full Paper
 
Copyrights ©Sathyabama Institute of Science and Technology (Deemed to be University).
Powered By: Infospace Technologies